Radio Type Approval, Homologation, Certification Services - Für weltweiten Marktzugang
Wir bieten Ihnen zuverlässig alle Servicedienstleistungen im Bereich Funk Zulassung, Radio Type Approval, Homologation, Certification Services in Ukraine (Kiev) an. Unser guter Kontakt zur Behörde in Ukraine (Kiev), insbesondere zu Ukrainian State Centre of Radio Frequencies (UCRF), Ukrmetrteststandard (UKRCSM), sowie die Kompetenzen im Bereich Homologation von Funk- Produkten und Short Range Devices (SRD) aus dem Consumer- als auch dem Automotive-Sektor im ISM-Frequenzband werden Ihren Marktstart in Ukraine reibungslos und kosteneffektiv gestalten.
Um Ihr Produkt erfolgreich auf den Markt zu bringen, bieten wir Ihnen den folgenden Service an:
Erörtern der geltenden Anforderungen für Ihr spezifisches Produkt oder Ihre technische Ausrüstung, damit diese(s) die aktuellen Regularien in Bezug auf Safety, EMC, Wireless, etc. erfüllt
Gewährleisten von vorbereitenden Konformitätsprüfungen während der Design- und Entwicklungsphase um die Konformität zu bestimmen
Assistieren bei der Vervollständigung von Anträgen und anderen notwendigen Formularen
Durchführung von Tests in unseren akkreditieren Laboren oder in Ihren qualifizierten Einrichtungen, um CB Test Reports und Zertifikate mit gültigen nationalen Anforderungen und anderen Test Reports für Wireless etc. auszustellen
Abwicklung des kompletten Prozesses, einschließlich der Zusammenarbeit mit lokalen Test-und Zertifizierungs-Organisationen
Anordnen der einleitenden Erstprüfungen, die erforderlich sind, um das Zertifikat zu erhalten
Koordinierung von Verifizierungsprüfungen für die zugelassenen Produkte, wenn gewünscht
Unterstützung und Beschleunigung des Projektfortschritts mit Unterstützung des lokalen IB-Lenhardt AG - Teams und/oder Partners
Unterstützung bei der Wartung und Erneuerung der Zertifikate, wenn gewünscht
Übersetzung der Bedienungsanleitung als Kundenservice, wenn gewünscht
Für Ukraine können wir Ihnen innerhalb kurzer Zeit ein Angebot auf Grundlage eines Datenblattes unverbindlich erstellen: email@example.com
Kennzeichnung des Zertifizierungs-Logos oder der Zertifizierungs-Nummer erforderlich?
Bestimmte Anforderungen im Handbuch?
Neuigkeiten in Ukraine
Russia/Ukraine Crisis: Type Approval Problems
Due to an armed geopolitical conflict in Ukraine, IB-Lenhardt has to put some current and future projects concerning type approval in the Russian Federation on hold.
There are three main reasons for this:
EU as well as the Russian Federation have reciprocally shut their airspace.
DHL and other logistics companies ship no longer to the Russian Federation at the moment, which directly affects sample delivery for mandatory local lab tests.
Due to renewed EU sanctions, it will come to payment issues as selected Russian banks have been excluded from the Society for Worldwide Interbank Financial Telecommunication (SWIFT) system of financial messaging.
We regret any inconvenience this force majeure may cause and hope for your understanding.
Due to an armed geopolitical conflict in Ukraine, type approvals relevant for the Republic of Belarus could be also affected in the nearest future.
According to news agencies, Belarus supports Russia on Ukraine which might also affect certification processes.
Due to an armed conflict and permanent state of emergency in Ukraine, IB-Lenhardt is forced to put all projects related to the country on hold.
We appreciate your understanding for this highly dynamic situation. We will keep you updated as the situation evolves.
Ministry of Health issued Recommendations for Medical Devices
On 2020-01-22, the Ministry of Health published the Order “On Approving Methodological Recommendations on the Application of the Technical Regulation on Medical Devices"
Methodological recommendations about technical regulations on Medical Devices became effective in Ukraine. These recommendations were harmonized with the current MEDDEV guidance documents, clarifying technical regulations for various medical devices. These recommendations are not mandatory but should support companies in the medical sector to apply the technical regulations effectively.
June - The Ukrainian Cabinet of Ministers adopted the Resolution № 557 to amend Resolution № 139 namely the “Technical Regulations on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment” (Ukrainian RoHS).
The Resolution № 557 came into force on July 3, 2019 - these are the main points:
1. The Resolution excludes pipe organs product group from the scope.
2. The compliance deadline of July 1, 2019 has been removed for mercury in electric rotating connectors used in intravascular ultrasound imaging systems capable of high operating frequency (> 50 MHz).
3. The goal of the Resolution is to achieve compliance with the requirements of the EU RoHS Directives:
(EU) 2018/736 as regards an exemption for lead in glass or ceramic for some electrical components
(EU) 2018/737 as regards an exemption for lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors
(EU) 2018/738 as regards an exemption for lead in cermet-based trimmer potentiometer elements
(EU) 2018/739 as regards an exemption for lead as an alloying element in steel
(EU) 2018/740 as regards an exemption for lead as an alloying element in aluminium
(EU) 2018/741 as regards an exemption for lead as an alloying element in copper
(EU) 2018/742 as regards an exemption for lead in high melting temperature solders
This amendment is based on the Directive (EU) 2017/2102 amending RoHS 2 Directive 2011/65/EU.
In accordance with the 3rd paragraph of the resolution of the Cabinet of Ministers of Ukraine as of 24.05.2017 N° 355 and its implementation until 31.12.2019, the technical regulations of radio equipment (TE RE) - approved by resolution of the Cabinet of Ministers of Ukraine dated 24.05.2017 N° 355 - DOES NOT apply to radio equipment installed and intended for use as a part of wheeled vehicles.
The Technical Regulation applies to radio equipment intended for use as a part of structure of wheeled vehicles, but not to installed parts on wheeled vehicles.
Conclusion; it only allpies to parts which available separately from vehicles.
If the radio equipment that is intended for use as a part of wheeled vehicles was implemented for use before 01.04.2018 and meets the requirements of the technical regulations for radio equipment and telecommunication end user (terminal) equipment approved by the resolution of the Cabinet of Ministers of Ukraine of 24.06.2009 N° 679, in that case the introduction into the market and the usage of such radio equipment is to be carried out without restrictions, provided that no changes have been done with regard to the structure and/or software that affects the essential requirements defined by paragraph 6-8 of the TR RE.
Where changes have been carried out, the manufacturer must carry out a conformity assessment of the radio equipment, in order to confirm its compliance with the essential requirements indicated in paragraph 6-8 of the TR RE.
Deadline EXTENDED until 31.12.2019
Ukraine has introduced amendments to the Resolution of the Cabinet of Ministers of Ukraine dated May 24, 2017 No. 355 "On Approval of the Technical Regulation of Radio Equipment".
Issued decree states that the DEADLINE for type approvals pursuant to the Technical Regulation of Radio Equipment has been extended until 31.12.2019 for vehicle components.
The additional paragraph states the following: To establish that until December 31, 2019, the operation of the Technical Regulation approved by this Resolution does not apply to radio equipment that is installed and intended for use as part of the construction of wheeled vehicles.
The amendment applies to vehicle radio equipments only and is valid for products which have already been approved pursuant to the previous RF TR.
Please be informed that according to the Ukrainian Technical Regulation (UA RED) the paragraph 25 states the following: Manufacturers must indicate their company's name, registered trade name or registered trademark and postal address at which they can be contacted, OR, if the size or nature of the radio equipment does not allow it, on the radio equipment package or in the accompanying document. Only one address shall be marked at which you can contact the manufacturer. Contact details are provided in accordance with the law on the application of languages.
The details in national language can be found in the Ukranian DoC which we prepare and provide to our customers for signature.
"To establish that before 2019-04-01 distribution and operation cannot be prohibited or limited due to reasons of non-compliance with the requirements of the Technical Regulation approved by this resolution, radio equipment, which
- was put into circulation before the date of entry into force of this resolution and
- meets the requirements of the Technical Regulation of Radio Equipment and Telecommunications Terminal Equipment, approved by the Resolution of the Cabinet of Ministers of Ukraine of June 24, 2009 No. 679 (Official Gazette of Ukraine, 2009, No. 50, item 1705), Technical Regulation on Electromagnetic Compatibility of Equipment , approved by the Decree of the Cabinet of Ministers of Ukraine dated December 16, 2015 No. 1077 (Official Gazette of Ukraine, 2016, No. 2, Article 72), Technical Regulations of Low Voltage Electric Equipment, approved by the Resolution of the Cabinet of Ministers of Ukraine id 16 December 2015 r. number 1067 (Official Bulletin of Ukraine, 2015 r., number 102, p. 3526). "
New Label Requirements
Ukraine’s Ministry of Economic Development and Trade confirmed the following new labelling format for radio equipment mandatory from 2017-09-01 onwards:
UA – stands for Ukraine
TR – provisional symbol of a Conformity Assessment Body (CAB) that is assigned to perform conformity assessment to the requirements of technical regulations
yyy - CAB ID number
Update on Conformity Declarations
The “Law of Ukraine No. 5312-VI”, released on 2012-11-29, contains the following news:
A Registration of Conformity Declarations in Ukraine is no longer required;
Declarations of Conformity issued in Ukraine for R&TTE, EMC, or Safety no longer require the registration by a CAB (Conformity Assessment Body);
It can now be replaced by a manufacturer's or his/her authorized representative's self-declaration.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
Diese Website verwendet nur die notwendigsten Cookies. Bitte akzeptieren Sie Cookies auf dieser Seite, sodass wir unsere Webseite optimal für Sie gestalten und fortlaufend verbessern können. Weitere Informationen zu Cookies und deren Widerspruch finden Sie in unserer Datenschutzerklärung