Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Malaysia (Kuala Lumpur). Our distinguished contact with the authority in Malaysia (Kuala Lumpur), our good relationship to Malaysian Communications and Multimedia Commission, SIRIM QAS International Sdn Bhd, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Malaysia trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Malaysia we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: firstname.lastname@example.org
GEO / MAP of Malaysia
General information about Malaysia
Degree of latitude
Degree of longitude
Malay (official), Chinese, Tamil, English
Marking of Certification Logo or Number Required?
Specific User Manual Requirements?
News for Malaysia
New requirement for Certificate holders
The Malaysia certification body SIRIM QAS International Sdn Bhd requested the certificate holders to sign and complete the compliance declaration uploaded to e-ComM (SIRIMs online portal). Please return the signed version to SIRIM’s address until 31st August 2021.
With this declaration the certificate holders confirm to SIRIM’s terms and conditions for Type Approval and accept to use the online portal to submit Type Approval applications, receive certificates and upload labels via the self-labelling program.
In case SIRIM does not receive the signed version in time the certificate holders may not be able to submit new applications or requests for renewals.
MCMC revised Technical Code for Short Range Devices
On 6 May 2020, the Malaysian Communications and Multimedia Commission (MCMC) registered the 2nd revision of the Technical Code for Short Range Devices “MCMC MTSFB TC T007:2020”, which cancels and replaces the previous version MCMC MTSFB TC T007:2014.
The main modification are as following:
a) Update the frequency bands and maximum transmit power limits for generic and specific SRD applications to be aligned with the latest Class Assignment No. 2 of 2019;
b) Inclusion of technical requirements for new SRD applications such as Ultra-Wideband (UWB), inductive device and automotive radar based on the latest Class Assignment No. 2 of 2019; and
c) Inclusion of new technical requirements for electrical safety and EMC for devices that can be directly connected to the service provider’s network.
Changing Process to Electronic Certification of Conformity
Since 11th of February the Industrial Research Institute of Malaysia (SIRIM QAS) has introduced the electronic Certificate of Conformity (eCOC).
Until 11th August a transitional period will be granted to the applicants to have the option to receive the hard copy version or the new eCOC, which will be created with a QR code for identification and traceability.
On 2015-02-24 a Self-Labelling Programme (SLP) was launched by the Malaysian Communications and Multimedia Commission (MCMC) and its appointed Certifying Agency, SIRIM. This will replace the conventional labeling program from 2015-06-15 onwards.
The SLP certification mark consists of:
"MCMC" (as word)
Common ID (CID) or certificate Holder ID (HID)
The SLP allows self-labelling by the certificate holder or manufacturer of their certified products according to related regulations (surface-marking or e-Labelling).
The Type A electrical plug (or flat blade attachment plug) is an ungrounded plug with two flat parallel pins. Although the American and Japanese plugs appear identical, the neutral pin on the American plug is wider than the live pin, whereas on the Japanese plug both pins are the same size. As a result, Japanese plugs can be used in the US but often not the other way around. The pins on Type A and Type B plugs have a hole near the tip that fits into ‘bumps’ found on the contact wipers of some sockets, so that the pins are gripped more tightly allowing for better contact and also to prevent the plug from slipping out of the socket. Some sockets have spring-action blades that grip the sides of the pins, making the holes obsolete.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type G electrical plug has three rectangular blades in a triangular pattern and has an incorporated fuse (usually a 3 amps fuse for smaller appliances such as a computer and a 13 amps one for heavy duty appliances such as heaters). British sockets have shutters on the live and neutral contacts so that foreign objects can’t be introduced into them.
The Type M plug has three round pins in a triangular pattern and looks similar to the Indian Type D plug, but its pins are much larger. Type M plugs are sometimes used for bigger appliances in countries that make use of Type D plugs, as well as in Israel (Type H). Therefore, sockets in these countries sometimes work with Type M plugs.